Community safety precaution of intelligent building system technology requirements Introduction

Safety and prevention work is in the building andmust be set, so can play on the intrusion alarm system,
residence, to take "air defense", "anti-matter", andsecurity system management and the integrated
"technical defense" means the combination to protectmanagement role.
the people in the production, life, personal and property(3) intrusion alarm system's basic requirements:fortified
safety, and production and living facilities from beingarea on the illegal invasion of real-time, reliable and
damaged . The main means of including in theaccurate alarm and review, to avoid leakage, false
prevention of zones, security personnel (air defense),alarm.alarm system shall be a network, run
the construction to prevent equipment (anti-matter), theindependently, with the output interface can be manual,
use of surveillance and communication technologies toautomated approach to the wired or wireless
prevent the establishment of security system. Mainlycommunications systems outside alarm. 110 is reserved
by the security system video surveillance systems,with the local public security alarm center network
intrusion alarm systems, patrol system, access controlinterface.system should be able to press time, location,
(access control) system, car parking managementregional any programming, or disarm defenses.should
system and the composition of visitors intercombe able to run the state of equipment and signal
systems. Its basic meaning is the integrated use oftransmission line testing, fault alarm will be issued timely
computer network technology, communicationand direct fault location.should have the ability to
technology, electronic information technology, safetyprevent damage, destruction or when the detector
technology, an advanced, the economy, supporting thecircuit is cut off, the system can be reported
safety and security system.immediately.the system can display alarm location,
Technical requirements 1. Video Surveillance Systemarea, time, can print, record, filed for the record, and
(1) should be based on the management of securitycan provide video surveillance and alarm linkage, lights
technology to prevent the need for a place to beand lighting control interface signal.important part in the
monitored, location, access and other real-time,important area and send alarm signals, the system can
effective video surveillance, detection, transmission,sound the alarm on-site verification.
display and recording. And should have the linkage(4) intrusion alarm system can be divided into a
alarm and image review functions.multi-alarm alarm and two, should be based on the
(2) monitoring the screen display should be able to anycomplexity of the deployment region choose a
programming and can be automatically or manuallydifferent system. Usually advised to use a simple alarm
switch, monitor screen should display the camerasystem, complex multi-level alarm system should be
number, location, time and date of the necessaryselected. An alarm system should be set one alarm
information.controller, multi-level alarm system should be set to a
(3) the monitoring system should be run from aconcentration of more than one area alarm controller
network independent and can and intrusion alarmand the alarm controller and can strain network.
systems, access control (access control) system(5) should be adopted in the important region has
control linkage. When the alarm occurs, the alarmdeployed more than two means of alarm detection
automatically to the site to review the images andand increase the reliability of alarm. Use of different
sound, can automatically switch to the specified sitetypes of alarms in different locations such as: switching
images displayed on monitors and automatic recording.alarm, glass breaking sensor should be installed in the
(4) with the central control room should be able todoors and windows positions; passive infrared, Doppler
network, to achieve control room on the videomicrowave alarm suitable for installation in indoor;
surveillance system, centralized monitoring andactive infrared, microwave alarm block device suitable
management.for installation in open air; voice alarm system should be
(5) technical requirements for video surveillanceused in conjunction with other types of alarm; video
systems should refer to the relevant provisions of GAmotion alarm and video surveillance systems for use. In
T367.such establishments, cashier, duty office position should
2. Intrusion Alarm System (1) under the managementbe set up emergency alarm device.
of security technology to prevent the need for(6) alarm installation should pay attention to: switch
maximum security area of the illegal invasion, theft,alarm switch in accordance with the requirements of
vandalism and robbery, effective real-time detectiondifferent types of installation; infrared, microwave,
and alarms, and review by the alarm function.alarm system installed in the room should be kept to
(2) intrusion alarm systems are generally from the2-2.4 m away from the wall or ceiling installation , and
detector, the regional controller and the alarm controlthe detection direction to maintain 45 ° -90 ° angle.
center composed of three parts. Usually a regionalOutdoor enclosure with the detector should be used in
controller, the detector coupled with sound and lightrain, fog, frost prevention, shading functionality.
alarm devices can constitute a simple alarm system.Intrusion alarm system technical requirements should
Systems that require higher security control centerrefer to GA/T368 in the regulations.