How to install security lighting in a home

Security lights are fixed outside the home on walls orthe wall lights outside. This are fixed on the eaves or
posts. This are in various shapes and sizes. These canon the beams. The level of fixing the lights should be
be ordinary bulbs, energy savers or flood lights. Theyon the beam or eaves on the ground floor. When a
can be controlled using switches in the house, motionlight is to use a sensor it should be located on the roof
sensors or detectors or photo cells. The home needslevel. This will give a larger area to be illuminated. The
illumination as one walks around the compound orgarden security lights should be located in open
approaching the gate at night. The system of puttingspaces. They should not have any hedge or shrub
them on can be made into different sections andobstructing because of the arising shadows.
integrated with sensors and the photo cell.When fixing gate security lights, two systems are
The security lights can also be fixed on the gardens,used. There should be two fixed on the columns
boundary walls and driveways. If the home has a largesupporting the gate. This can be on through the night.
compound, the system should be made automatic. ThisAnother set is mounted higher but connected to
is by using a photo cell. This is a sensor that turns onmotion sensor. This are turned on when a car or
the system using the day light. As the day dims outanything moves towards the gate from inside or
towards the evening, the system turns on the lightsoutside. This are brighter and more powerful. Along the
and vice versa towards the morning. Each home hasboundary wall, similar lights as the gate permanent
diverse needs for illumination and therefore a survey isones are installed. This are also backed up with a flood
necessary before embarking on any system.light connected to a motion detector around the wall.
When fixing security lights around the home, start with